Indu Altimeter is an electronic device, which mimics classical altimeter construction and combines it with the state of the art electronics. This results in the best of both worlds; a perfect and intuitive analogue reading combined with high precision of modern electronics.
Indu Altimeter Adjustments
We take great care to design our instruments lightweight and slim as possible. Altimeter only weighs 240 g.
Integrated backup battery (optional)
Integrated battery provides approx. 1h of uninterrupted instrument operation.
The altimeter must be connected to the static pressure source. Either fuselage side surfaces or from the static port on the pitot tube.
CAN bus connection
Altimeter will transmit altitude, QNH and vario to other units connected to the bus. It also serves as a data logger.
A rotating knob is used to adjust the barometric offset (QNH value).
High precision electronic barometric sensor, which provides static pressure information in digital form.
Linear 360° scale
Scale is divided linearly. Large pointer works in 1000 m (feet) per revolution, 20 m markings (20 feet). Small pointer works in 10000 m (feet) per revolution, 200 m markings (200 feet).
The instrument can be delivered with two different scales. One scale is in feet and the other scale is in meters.
Different QNH units
You can choose between hPa in the range of (590 - 1080) with one hPa step and inHg in the range of (17.42 - 31.89) with 0.01 inHg step.
Colour LCD display
The pressure information is also shown on a colour LCD display.
Round slave altimeter. Requires EMSIS PFD or NESIS or some other master to be present on the CAN bus.
EMSIS can be connected with a backup battery and UPSU electronics. This is wiring schema, which is using double pole switch. This switch is necessary to simultaneously connect/disconnect main power line and backup power line.